Magicgames II » =http://www.wholesalenfljerseysforcheap.us.co

Question: 1

Which description of an import operation in Cisco UCS Manager is true?

A. You can perform an import while the system is up and running.
B. You can import only a configuration file that was exported from the same Cisco UCS Manager.
C. You can import a configuration from a higher release to a lower release.
D. You can schedule an import operation.


Answer: A


Question: 2

When a configuration change requires a reboot nike air max tn femme pas cher , which policy specifies how Cisco UCS manager should proceed?


A. host firmware policy
B. local disk policy
C. maintenance policy
D. boot policy


Answer: C


Question: 3

You are creating service profiles for a Cisco UCS system by using the service profile wizard. You discover that you forgot to create the UUID pool.
What should you do?


A. From the wizard, click Create UUID Suffix Pool.
B. Pause the running wizard, and then start a temporary wizard to create a profile with the same name and the missing UUID pool. Resume the wizard nike air max tn homme pas cher , and then select the new UUID pool.
C. Continue running the wizard. The service profile uses the burned-in UUID in the BIOS of the server.
D. Stop the wizard, and then restart the wizard.


Answer: A


Question: 4

Which two features in Cisco UCS Manager are required to configure Uplink Ethernet ports? (Choose two.)


A. vNIC templates
B. LAN Pin Groups
C. VLAN groups
D. adapter policies
E. link profiles


Answer: B,C


Question: 5

You need to design and implement a Cisco UCS 5108 Blade Server Chassis system for a customer.
Which statement about how half-width blades and full-width blades can be used is true?


A. Only two full-width blades can be installed in the top two slots nike air max tn requin pas cher , and four half-width blades can be installed in the bottom two slots.
B. Only one full-width blade can be installed in the top slot, and six half-width blades can be installed in the bottom slots.
C. Half-width blades and full-width blades can be combined in any order.
D. Half-width blade types and full-width blade types cannot be combined.


Answer: C


Question: 6

Before upgrading a Cisco UCS cluster. you need to verify the high-availability statue and roles of the cluster.
In which scenario can you successfully perform the upgrade'?


A. When you check the Cisco UCS Manager GUI, the Ready field value is Ready and the State field value is On. When you check the Cisco UCS Manager CLI nike air max classic bw femme pas cher , the Primary and Secondary interconnect state are both ON and the cluster state is HA WAITING.
B. When you check the Cisco UCS Manager GUI, the Ready field value is Yes and the State field value is Up. When you check the Cisco UCS Manager CLI, the Primary and Secondary interconnect state are both UP and the cluster state is HA READY.
C. When you check the Cisco UCS Manager GUI nike air max classic bw homme pas cher , the Ready field value is Ready and the State field value is Active. When you check the Cisco UCS Manager CLI, the Primary and Secondary interconnect state are both READY and the cluster state is HA WAITING.
D. When you check the Cisco UCS Manager GUI, the Ready field value is Ready and the State field value is Up. When you check the Cisco UCS Manager CLI nike air max 90 femme pas cher , the Primary and Secondary interconnect state are both UP and the cluster state is HA UP.


Answer: D


Question: 7

Which destination(s) are valid for syslog messages for a Cisco UCS Fabric Interconnect?


A. the log, the monitor and syslog queue
B. a file
C. the console and log only
D. the console, the monitor nike air max 90 homme pas cher , and a file


Answer: D


Question: 8

You plan to use AAA security services for a Cisco UCS Fabric Interconnect.
Which two authentication protocols can you use? (Choose two.)


A. NTLM
B. Kerberos
C. RADIUS
D. Diameter
E. LDAP


Answer: C,E


Question: 9

You need to identify which DCB standard provides these functionalities: negotiation capabilities for features, the distribution of parameters from one node to another nike air max 90 pas cher , and logical link up and down signaling for both Ethernet and Fibre Channel interfaces.
Which DCB standard should you identify?


A. ETS
B. PFC
C. DCBX
D. QCN


Answer: C


Question: 10

You configure FCoE in a Cisco UCS system at a customer site. The configuration seems correct, but the customer complains that the system fails to perform as expected. FCoE VLAN discovery, FCF discovery and FLOGI processes work properly. The issue appears to be with the Fibre Channel commands and responses.
What is a possible cause of the issue?


A. The storage device is experiencing configuration or compatibility issues when the FIP process completes successfully.
B. The routed Layer 3 network between the FCoE SAN and the storage device is experiencing issues when the FIP process fails to complete successfully.
C. The FCoE configuration is experiencing errors because of issues with the Fibre Channel commends.
D. The switched Layer 2 network between the FCoE SAN and the storage device is experiencing issues when the FIP process fails to complete successfully.


Answer: B


Question: 11

You need to configure a new Fibre Channel port channel from the Cisco UCS Manager GUI. To do this nike air max 2017 homme pas cher , from the SAN tab, you navigate to SAN Cloud > Fabric A or B > FC Port Channels, and you click the plus sign. In the popup window nike air max 2017 femme pas cher , you specify the Fibre Channel port channel name and ID.
Which two rules should you follow when you set the Fibre Channel port channel name and ID? (Choose two.)


A. The

Choosing an assisted living facility in Tampa can be difficult. You want to find one that. wholesale air max plus air max wholesale online Cheap Jerseys Cheap Jerseys From China Wholesale Jerseys China Cheap Football Jerseys Cheap NFL Jerseys China Cheap Vintage NFL Jerseys Wholesale Nike NFL Jerseys Wholesale NFL Jerseys